Ocean Master 1500 is a one of our current developments for the fishing industry. The pump will have a capacity of 1500 m3/h. Ready for pre-order.
Ocean Master 1500
Applications
- Fishing vessels
- Onshore fish handling systems
Generation: 2.0
- 2nd generation High Strength Rotor
- Integrated water system
- Lifetime lubricated bearings
- Easy drain
- Stainless steel flow plates
Bearing cover
Drive end
Item no.: 1620182
Bearing cover
Non-drive end
Item no.: 1620181
Bearing house
Drive end
Item no.: 1620179
Bearing house
Non-drive end
Item no.: 1620179
Bearing
Drive end
Item no.: 930000324
Bearing
Non-drive end
Item no.: 930000324
Mechanical shaft seal
Drive end
Item no.: 1634851
Mechanical shaft seal
Non-drive end
Item no.: 1634851
Pump house
Drive end
Item no.: 1658025
Pump house
Non-drive end
Item no.: 1658003
Flow plate
Drive end
Item no.: 1658021
Flow plate
Non-drive end
Item no.: 1658021
Shell
Stainless steel
Item no.: 1658010
Shell
Cast iron
Item no.: 1658012
Clockwise/ counterclockwise
Complete your vacuum system
with the right components
4-way valve DN125
High performance and maintenance free 4-way valve DN125. Casted in duplex stainless steel to withstand the tough seawater environments.
| Connection | DN125 |
| Material | Duplex |
| Operates by | Air |
| Positions by | Limit switch |
Vacuum control valve
Install the vacuum control valve in the suction line and protect your vacuum pump from cavitation damage.
| Connection | 1″ BSPP |
| Area | 0 – 1013 mbar |
| Activates by | Auto |
| Required power | None |
Hydraulic motor set 160
A complete hydraulic motor set for Ocean Master 1500 dimensioned to perform full vacuum and pressure. Mounted in our factory.
| Pump fit | OM 1500 |
| P. Max | 3.0 bar |
| Motor | 160 cm3/Rev |
| Mounted | Yes |
Performance
How to read the performance curve
The suction and discharge performances are calculated in normal cubic meters per hour corresponding to the displacement of water flow in and out of the holding tank. The performance is measured without pressure drop and this must be therefore calculated and added to the static pressure in both suction and discharge. For further information and examples, please refer to the pump manual.
Reliability
Designed for tough seawater applications
Building on decades of application expertise to withstand the harsh and corrosive seawater environments the Ocean Master 2.0 stands out on durability, robustness as well as being service friendly and easy to install and operate
Life-time lubricated bearings
Protection sleeves
 | High-strength rotor |
Integrated water system
Stainless steel flow plates
Ocean Master 1500 G 2.0
Specifications
| Part | Material | Specification EU | Specification US |
| Bearing cover | Cast Iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Radial shaft seal | Rubber | DIN 3760A | DIN 3760A |
| Paper gasket | Paper | Oil resistant gasket | Oil resistant gasket |
| Bearing housing | Cast Iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Mechanical shaft seal | Rubber / Stainless Steel / Silicium / Carbon | NBR / 1.4401 / SiC / C | NBR / 1.4401 / SiC / C |
| Pump Housing | Cast Iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Flow Plates | Stainless Steal | 1.4401 | AISI 316 |
| Rubber gasket | Rubber | NBR | NBR |
| Shell option 1 | Cast Iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Shell option 2 | Stainless steel | 1.4401 | AISI 316 |
| Stay Bolt | Carbon steel | – | – |
| Rotor | Stainless steel | HSR 2nd Generation | HSR 2nd Generation |
Other models
The Ocean Master Series G 2.0
They stand out on durability, robustness as well as being service friendly, easy to install and operate. It’s the liquid ring vacuum pump line designed to withstand the harshest seawater environments.
Get started with Ocean Master pumps
Whether you are interested in prizing, calculations or simply more information about our Ocean Master series.
We are here to assist you!
Direct: +45 87 50 95 85
E-mail: ml@samson-pumps.com