Air speed 1500 RPM
Truck Master 3
Operation benefits
- Ex Zone 1
- Low noise
- Low weight
- Zero emissions
- Maintenance free
Application
performance
Vacuum-lift fluids | Air-lift fluids | Air-lift solids | |
Suction hose 2″ | 1000 RPM | 1000 RPM | 1000 RPM |
Suction hose 3″ | 1000 RPM | 1100 RPM | 1600 RPM |
Suction hose 4″ | 1000 RPM | ||
Suction hose 5″ | 1000 RPM | ||
Suction hose 6″ | 1000 RPM |
The Truck Master 3 has its best performance in 3″ suction hoses and secondary in 2″ with reduced RPMs. For suction hoses above 3″ (4″ – 5″) we recommend this pump for vacuum lifts of fluids only. |
Vacuum
performance
Metric | m3/h | kW | Nm |
1900 RPM | 700 | 20 | 100 |
1800 RPM | 651 | 17 | 85 |
1700 RPM | 605 | 15 | 75 |
1600 RPM | 563 | 13 | 65 |
Preliminary data
US | CFM | HP | Ibs *ft |
1900 RPM | 412 | 27 | 74 |
1800 RPM | 383 | 23 | 63 |
1700 RPM | 356 | 20 | 56 |
1600 RPM | 331 | 18 | 48 |
Preliminary data
Water
consumtion
Metric | 50% vacuum | 70% vacuum | 80% vacuum |
20℃ | 1,0 | 0,6 | 0,4 |
30℃ | 1,8 | 1,1 | 0,7 |
40℃ | 3,2 | 1,9 | 1,3 |
50℃ | 5,3 | 3,2 | 2,1 |
55℃ | 6,7 | 4,0 | 2,7 |
l/h
Preliminary data
US | 50% vacuum | 70% vacuum | 80% vacuum |
68℉ | 0,3 | 0,2 | 0,1 |
86℉ | 0,5 | 0,3 | 0,2 |
104℉ | 0,8 | 0,5 | 0,3 |
122℉ | 1,4 | 0,8 | 0,6 |
131℉ | 1,8 | 1,1 | 0,7 |
GAL/h
Preliminary data
Bearing cover
Drive end
Item no.: 1657012
Bearing cover
Non-drive end
Item no.: 1657014
Bearing house
Drive end
Item no.: 1657031
Bearing house
Non-drive end
Item no.: 1657031
Bearing
Drive end
Item no.: 930000323
Bearing
Non-drive end
Item no.: 930000323
Mechanical shaft seal
Drive end
Item no.: 1634847
Mechanical shaft seal
Non-drive end
Item no.: 1634847
Pump house
Drive end
Item no.: 1657025
Pump house
Non-drive end
Item no.: 1657002
Flow plate aluminium
Drive end
Item no.: 1657019
Flow plate aluminium
Non-drive end
Item no.: 1657017
Shell
Cast iron
Item no.: 1657010
System components for
Truck Master 3
Water Separator 3
The SAMSON PUMPS Water Separator 3 is designed for Truck Master 3 and smaller conventional vacuum trucks with 3″ suction hoses.
Suction hose | 3″ |
ATEX | Zone 1 |
Generation | 1 |
Main material | PP |
4-way valve DN80
High performance and maintenance free 4-way valve DN80. Controlled by a pneumatic actuator. 2 flow positions and a neutral position.
Pipe system | DN80 |
Operates by | Air |
Generation | 2 |
Main material | Cast iron |
Hydraulic motor set 32
Hydraulic motor set for Truck Master 3 including adaptor, coupling & mounted on the pump. Ready to perform full vacuum and pressure.
Suction hose | 3″ |
Motor | 032 ISO |
P. Max | 400 bar |
Mounted | Yes |
Non-return valve DN65
To secure water/air flow, install the non-return valve in the vacuum system avoiding water loss and pump drainage.
Suction hose | 3″ |
Pipe system | DN65 |
P. Max | |
Main material | Cast iron |
Vacuum control valve
Install the vacuum control valve in the suction line and protect your vacuum pump from cavitation damage.
Connection | 1″ BSPP |
Area | 0 – 1013 mbar |
Activates by | Auto |
Required power | None |
The power
of liquid ring
technology
Build low noise, zero emissions and minimal maintenace vacuum trucks with liquid ring techonology. At Samson Pumps we believe liquid ring technology is the future for vacuum trucks and we are dedicated to create the vacuum pumps of the future.
lubricated
bearings
Cast iron
flow plates
High-performance rotor |
Truck Master 3
Specifications
Part | Material | Specification EU | Specification US |
Bearing cover | Aluminium | EN AlSi7Mg | A03560 |
Bearing housing | Aluminium | EN AlSi7Mg | A03560 |
Pump housing | Aluminium | EN AlSi7Mg | A03560 |
Flow plate | Aluminium | EN AlSi7Mg | A03560 |
Shell | Aluminium | EN AlSi7Mg | A03560 |
Radial shaft seal | Rubber | DIN 3760A | DIN 3760A |
Rotor | Aluminium & Stainless steel | HPR | HPR |
Universal gasket | Aramid, inorganic filters & NBR | – | – |
Mechanical shaft seal | Rubber/ Stainless Steel/ Silicium / Carbon | NBR / 1.4401 /SiC / C | NBR / 1.4401 /SiC / C |
Other vacuum
truck pumps
They stand out on durability, robustness as well as being service friendly, easy to install and operate. They are designed and optimized for vacuum truck operations.
Get started with Truck Master pumps
Whether you are interested in prizing, calculations or simply more information about our Truck Master series.
We are here to assist you!
Direct: +45 87 50 95 96
E-mail: htm@samson-pumps.com