Operation benefits
- Ex Zone 1 & 0
- Zero emission
- High resistance
- Low noise
- Low maintenance
SLP 2100
Generation: 1.0
- Optimum rotor
- Designed for vacuum trucks
SLP 2700 is a liquid ring vacuum pump recommended for conventional vacuum trucks with 6″ suction hoses. The truck friendly design makes the pump very easy to install on any type of vacuum trucks.
Application
performance
| Vacuum-lift fluids | Air-lift fluids | Air-lift solids | |
| Suction hose 2″ | 800 RPM | 800 RPM | 800 RPM |
| Suction hose 3″ | 800 RPM | 800 RPM | 800 RPM |
| Suction hose 4″ | 800 RPM | 900 RPM | 1100 RPM |
| Suction hose 5″ | 800 RPM | 1000 RPM | 1300 RPM |
| Suction hose 6″ | 800 RPM | 1500 RPM |
| The SLP 2100 has its best performance in 5” suction hoses and secondary in 3” and 4” with reduced RPMs. For suction hoses above 5” (6″) we recommend this pump for vacuum lifts of fluids only. |
Vacuum
performance
| Metric | m3/h | kW | Nm |
| 1600 RPM | 2320 | 68 | 406 |
| 1500 RPM | 2184 | 59 | 376 |
| 1400 RPM | 2052 | 53 | 362 |
| 1300 RPM | 1949 | 46 | 338 |
| 1200 RPM | 1781 | 40 | 318 |
| US | CFM | HP | Ibs *ft |
| 1600 RPM | 1366 | 92 | 299 |
| 1500 RPM | 1285 | 80 | 277 |
| 1400 RPM | 1208 | 72 | 267 |
| 1300 RPM | 1147 | 63 | 249 |
| 1200 RPM | 1048 | 54 | 235 |
Pressure
performance
| Metric | m3/h | kW | Nm |
| 1600 RPM | 1462 | 88 | 525 |
| 1500 RPM | 1373 | 77 | 490 |
| 1400 RPM | 1292 | 65 | 443 |
| 1300 RPM | 1128 | 55 | 404 |
| 1200 RPM | 802 | 46 | 366 |
1 bar(g)
| US | CFM | HP | Ibs *ft |
| 1600 RPM | 861 | 120 | 387 |
| 1500 RPM | 808 | 105 | 362 |
| 1400 RPM | 760 | 88 | 327 |
| 1300 RPM | 664 | 75 | 298 |
| 1200 RPM | 472 | 63 | 270 |
14,5 psi
Water
consumtion
| Metric | 50% vacuum | 70% vacuum | 80% vacuum |
| 20℃ | 8 | 4 | 2 |
| 30℃ | 20 | 10 | 6 |
| 40℃ | 39 | 19 | 11 |
| 50℃ | 67 | 33 | 19 |
| 60℃ | 111 | 54 | 31 |
l/h
| US | 50% vacuum | 70% vacuum | 80% vacuum |
| 68℉ | 2 | 1 | 1 |
| 86℉ | 5 | 3 | 2 |
| 104℉ | 10 | 5 | 3 |
| 122℉ | 18 | 9 | 5 |
| 140℉ | 29 | 14 | 8 |
GAL/h
Bearing cover
Drive end
Item no.: 1620182
Bearing cover
Non-drive end
Item no.: 1620181
Bearing house
Drive end
Item no.: 1653036
Bearing house
Non-drive end
Item no.: 1653036
Bearing
Drive end
Item no.: 930000297
Bearing
Non-drive end
Item no.: 930000296
Mechanical shaft seal
Drive end
Item no.: 1634851
Mechanical shaft seal
Non-drive end
Item no.: 1634851
Pump house
Drive end
Item no.: 1653034
Pump house
Non-drive end
Item no.: 1653033
Flow plate
Drive end
Item no.: 1653025
Flow plate
Non-drive end
Item no.: 1653025
Shell
Cast iron
Item no.: 1653042
Assembly tools
Pump service
Item no.: 1629270
Automatic lubricator
Automatic lubricator
Item no.: 1639003
Set of gaskets
Automatic lubricator
Item no.: 1653060
System components for
SLP 2100
Water Separator 5
The SAMSON PUMPS Water Separator 5 is designed for conventional vacuum trucks with 5″ suction hoses.
| Suction hose | 5″ |
| ATEX | Zone 1 |
| Generation | 1 |
| Main material | PP |
4-way valve DN100
High performance and maintenance free 4-way valve DN100, controlled by a pneumatic actuator. Has 2 flow positions and a central position.
| Pipe system | DN100 |
| Operates by | Air |
| Generation | 2 |
| Main material | Cast iron |
Hydraulic motor set 90
Hydraulic motor for SLP 2100 including adaptor, coupling & mounted on the pump. Ready to perform full vacuum and pressure.
| Suction hose | 5″ |
| Motor | 090 ISO |
| P.Max | 400 bar |
Non-return valve DN100
To secure water/air flow, install the non-return valve in the vacuum system avoiding water loss and pump drainage.
| Suction hose | 5″ |
| Pipe system | DN100 |
| P. Max | |
| Main material | Cast iron |
Vacuum control valve
Install the Vacuum control valve in the suction line and protect your vacuum pump from cavitation damage.
| Connection | 1″ BSPP |
| Area | 0 – 1013 mbar |
| Activates by | Auto |
| Required power | None |
The power
of liquid ring
technology
Build low noise, zero emissions and minimal maintenace vacuum trucks with liquid ring techonology. At Samson Pumps we believe liquid ring technology is the future for vacuum trucks and we are dedicated to create the vacuum pumps of the future.
Life-time
lubricated
bearings
lubricated
bearings
Bronze /
Cast iron
flow plates
Cast iron
flow plates
Integrated water system
 | High-performance rotor |
Mechanical shaft seals
SLP 2100
Specifications
| Part | Material | Specification EU | Specification US |
| Bearing cover | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Radial shaft seal | Rubber | DIN 3760A | DIN 3760A |
| Paper gasket | Paper | Oil resistant gasket | Oil resistant gasket |
| Bearing housing | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Mechanical shaft seal | Rubber / Stainless Steel / Silicium / Carbon | NBR / 1.4401 / SiC / C | NBR / 1.4401 / SiC / C |
| Pump housing | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Flow plate | Stainless steel | EN 1.4404 | AISI 316L |
| Flow plate (EX model) | Stainless steel | EN 1.4404 | AISI 316L |
| O-ring | Rubber | NBR | NBR |
| Shell | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Rotor | Stainless steel | HPR | HPR |
Other vacuum
truck pumps
They stand out on durability, robustness as well as being service friendly, easy to install and operate. They are designed and optimized for vacuum truck operations.
Get started with Truck Master pumps
Whether you are interested in prizing, calculations or simply more information about our Truck Master series.
We are here to assist you!
Direct: +45 87 50 95 96
E-mail: htm@samson-pumps.com