SLP 3100

Operation benefits 

  • Ex Zone 1 & 0
  • Zero emission
  • High resistance
  • Low noise
  • Low maintenance

Generation: 1.0

  • Optimum rotor
  • Designed for vacuum trucks 

SLP3100 is a liquid ring vacuum pump recommended for conventional vacuum trucks with 6″ suction hoses. The truck friendly design makes the pump very easy to install on any type of vacuum trucks.

    Let us calculate the best solution

    according to your specifications

      The start of any purchase begins with a quote

      State your requirements and we will get you started



      Application

      performance

      Vacuum-lift
      fluids
      Air-lift
      fluids
      Air-lift
      solids
      Suction hose 2″800 RPM800 RPM800 RPM
      Suction hose 3″800 RPM800 RPM800 RPM
      Suction hose 4″800 RPM900 RPM1100 RPM
      Suction hose 5″800 RPM1000 RPM1300 RPM
      Suction hose 6″800 RPM1500 RPM
      The SLP 3100 has its best performance in 6” suction hoses and secondary in 4” and 5” with reduced RPMs. For suction hoses above 6” (8”) we recommend this pump for vacuum lifts of fluids only.

      Vacuum

      performance

      Metricm3/hkWNm
      1600 RPM294790537
      1500 RPM286078497
      1400 RPM272468464
      1300 RPM254260441
      1200 RPM215956446
      USCFMHPIbs *ft
      1600 RPM1735122396
      1500 RPM1683106366
      1400 RPM160392342
      1300 RPM149682325
      1200 RPM127176329

      Pressure

      performance

      Metricm3/hkWNm
      1600 RPM1695116692
      1500 RPM156899630
      1400 RPM143786587
      1300 RPM132675551
      1200 RPM124865517

      1 bar(g)

      USCFMHPIbs *ft
      1600 RPM998158511
      1500 RPM923135465
      1400 RPM846117433
      1300 RPM780102406
      1200 RPM73588382

      14,5 psi

      Water

      consumtion

      Metric50% vacuum70% vacuum80% vacuum
      20℃1053
      30℃25137
      40℃502613
      50℃874623
      60℃1427537

      l/h

      US50% vacuum70% vacuum80% vacuum
      68℉311
      86℉732
      104℉1373
      122℉23126
      140℉382010

      GAL/h

      Spare parts quote

        Request 3d file


          Request manual

            System components for 

            SLP 3100

            Water Separator 6

            The SAMSON PUMPS Water Separator 6 is designed for conventional vacuum trucks with 6″ suction hoses.

            Suction hose 6″
            ATEXZone 1
            Generation1
            Main material PP

            4-way valve DN125

            High performance and maintenance free 4-way valve DN125, controlled by a pneumatic actuator. Has 2 flow positions and a central position. 

            Pipe system DN125
            Operates by Air
            Generation2
            Main material Cast iron

            Hydraulic motor set 160

            Hydraulic motor for SLP 3100 including adaptor, coupling & mounted on the pump. Ready to perform full vacuum and pressure.

            Suction hose6″
            Motor160 ISO
            P.Max400 bar

            Non-return valve DN125

            To secure water/air flow, install the non-return valve in the vacuum system avoiding water loss and pump drainage.

            Suction hose 6″
            Pipe system DN125
            P. Max
            Main material Cast iron

            Vacuum control valve

            Install the Vacuum control valve in the suction line and protect your vacuum pump from cavitation damage. 

            Connection 1″ BSPP
            Area 0 – 1013 mbar
            Activates byAuto
            Required powerNone

            The power

            of liquid ring

            technology

            Build low noise, zero emissions and minimal maintenace vacuum trucks with liquid ring techonology. At Samson Pumps we believe liquid ring technology is the future for vacuum trucks and we are dedicated to create the vacuum pumps of the future.  

            Life-time
            lubricated
            bearings
            Bronze /
            Cast iron
            flow plates
            Integrated water system
            High-performance rotor
            Mechanical shaft seals

            SLP 3100

            Specifications

            PartMaterialSpecification EUSpecification US
            Bearing coverCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Radial shaft sealRubberDIN 3760ADIN 3760A
            Paper gasketPaperOil resistant gasketOil resistant gasket
            Bearing housingCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Mechanical shaft
            seal
            Rubber / Stainless Steel
            / Silicium / Carbon
            NBR / 1.4401 /  SiC / CNBR / 1.4401 /  SiC / C
            Pump housingCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Flow plateStainless steelEN 1.4404AISI 316L
            Flow plate (EX
            model)
            Stainless steel EN 1.4404AISI 316L
            O-ringRubberNBRNBR
            ShellCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            RotorStainless steelHPRHPR

            Other vacuum 

            truck models

            They stand out on durability, robustness as well as being service friendly, easy to install and operate. They are designed and optimized for vacuum truck operations. 

            Truck Master 3400

            Truck Master Series
            Generation 2.0

            Explore

            Truck Master 2500

            Truck Master Series
            Generation 2.0

            Explore

            Truck Master 1700

            Truck Master Series
            Generation 2.0

            Explore

            Truck Master 3

            Future Series
            Generation 1.0

            Explore

            Truck Master 2

            Future Series
            Generation 1.0

            Explore

            SLP 2700

            SLP Series
            Generatio 1.0

            Explore

            SLP 2100

            SLP Series
            Generatio 1.0

            Explore

            Get started with Truck Master pumps

            Whether you are interested in prizing, calculations or simply more information about our Truck Master series.

            We are here to assist you!

            Direct: +45 87 50 95 96
            E-mail: htm@samson-pumps.com

            Please contact me