Truck Master 1700

Air speed 1500 RPM

3” Suction hose: 62 m/s
4" Suction hose: 35 m/s
5" Suction hose: 22 m/s

Operation benefits 

  • Ex Zone 1 & 0
  • Zero emission
  • High resistance
  • Low noise
  • Low maintenance

Generation: 2.0

  • Optimum rotor
  • Integrated water systems
  • Designed for vacuum trucks 
Read More

    Let us calculate the best solution

    according to your specifications

      The start of any purchase begins with a quote

      State your requirements and we will get you started



      Application

      performance

      Vacuum-lift
      fluids
      Air-lift
      fluids
      Air-lift
      solids
      Suction hose 2″900 RPM900 RPM900 RPM
      Suction hose 3″900 RPM900 RPM900 RPM
      Suction hose 4″900 RPM1100 RPM1500 RPM
      Suction hose 5″900 RPM1800 RPM
      Suction hose 6″900 RPM
      The Truck Master 1700 has its best performance in 4” suction hoses and secondary in 2” and 3” with reduced RPMs. For suction hoses above 4” (5 – 6”) we recommend this pump for vacuum lifts of fluids only.

      Vacuum

      performance

      Metricm3/hkWNm
      1800 RPM161949260
      1700 RPM155044247
      1600 RPM145740239
      1500 RPM132134216
      USCFMHPIbs *ft
      1800 RPM95367192
      1700 RPM91260182
      1600 RPM85854176
      1500 RPM77846160

      Pressure

      performance

      Metricm3/hkWNm
      1800 RPM94465345
      1700 RPM81060337
      1600 RPM75754322
      1500 RPM67447299

      1 bar(g)

      USCFMHPIbs *ft
      1800 RPM95388192
      1700 RPM91282182
      1600 RPM85873176
      1500 RPM77864160

      14,5 psi

      Water

      consumtion

      Metric50% vacuum70% vacuum80% vacuum
      20℃1254
      30℃17107
      40℃342013
      50℃603524
      55℃1006039

      l/h

      US50% vacuum70% vacuum80% vacuum
      68℉311
      86℉432
      104℉953
      122℉1696
      131℉261610

      GAL/h

      Spare parts quote

        Request 3d file


          Request manual

            System components for 

            Truck Master 1700

            Water Separator 4

            The SAMSON PUMPS Water Separator 4 is designed for Truck Master 1700 and conventional vacuum trucks with 4″ suction hoses. 

            Suction hose4″
            ATEX Zone 1
            Generation1
            Main material PP

            4-way valve DN100

            High performance and maintenance free 4-way valve DN100. Controlled by a pneumatic actuator. Has 2 flow positions and a neutral position. 

            Pipe systemDN100
            Operates byAir
            Generation2
            Main material Cast iron

            Hydraulic motor set 63

            Hydraulic motor set for Truck Master 1700 including adaptor, coupling & mounted on the pump. Ready to perform full vacuum and pressure.

            Suction hose 4″
            Motor 063 ISO
            P. Max300 bar
            Mounted Yes

            Non-return valve DN100

            To secure water/air flow, install the non-return valve in the vacuum system avoiding water loss and pump drainage.

            Suction hose 4″- 5″
            Pipe systemDN100
            P. Max
            Main materialCast iron

            Vacuum control valve

            Install the Vacuum control valve in the suction line and protect your vacuum pump from cavitation damage. 

            Connection 1″ BSPP
            Area 0 – 1013 mbar
            Activates byAuto
            Required powerNone

            The power

            of liquid ring

            technology

            Build low noise, zero emissions and minimal maintenace vacuum trucks with liquid ring techonology. At Samson Pumps we believe liquid ring technology is the future for vacuum trucks and we are dedicated to create the vacuum pumps of the future.  

            Life-time
            lubricated
            bearings
            Bronze /
            Cast iron
            flow plates
            Integrated water system
            High-performance rotor
            Mechanical shaft seals

            Truck Master 1700

            Specifications

            PartMaterialSpecification EUSpecification US
            Bearing coverCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Radial shaft sealRubberDIN 3760ADIN 3760A
            Paper gasketPaperOil resistant gasketOil resistant gasket
            Bearing housingCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Mechanical shaft
            seal
            Rubber / Stainless Steel
            / Silicium / Carbon
            NBR / 1.4401 /  SiC / CNBR / 1.4401 /  SiC / C
            Pump housingCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Flow plateCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            Flow plate (EX
            model)
            BronzeCuSn10-C EN 1982
            (CC480K)
            C92700 B505 B505M
            Rubber gasketRubberNBRNBR
            ShellCast ironEN-GJL-250; EN 1561250/275-35-35B 40-40B
            RotorStainless steelHPRHPR

            Other vacuum 

            truck pumps

            They stand out on durability, robustness as well as being service friendly, easy to install and operate. They are designed and optimized for vacuum truck operations. 

            Truck Master 3400

            Truck Master Series
            Generation 2.0

            Explore

            Truck Master 2500

            Truck Master Series
            Generation 2.0

            Explore

            Truck Master 3

            Future Series
            Generation 1.0

            Explore

            Truck Master 2

            Future Series
            Generation 1.0

            Explore

            SLP 3100

            SLP Series
            Generation 1.0

            Explore

            SLP 2700

            SLP Series
            Generation 1.0

            Explore

            SLP 2100

            SLP Series
            Generation 1.0

            Explore

            Get started with Truck Master pumps

            Whether you are interested in prizing, calculations or simply more information about our Truck Master series.

            We are here to assist you!

            Direct: +45 87 50 95 96
            E-mail: htm@samson-pumps.com

            Please contact me