Air speed 1200 RPM
Truck Master 3400
Operation benefits
- Ex Zone 1 & 0
- Zero emission
- High resistance
- Low noise
- Low maintenance
Application
performance
| Vacuum-lift fluids | Air-lift fluids | Air-lift solids | |
| Suction hose 2″ | 600 RPM | 600 RPM | 600 RPM |
| Suction hose 3″ | 600 RPM | 600 RPM | 600 RPM |
| Suction hose 4″ | 600 RPM | 600 RPM | 700 RPM |
| Suction hose 5″ | 600 RPM | 700 RPM | 900 RPM |
| Suction hose 6″ | 600 RPM | 1000 RPM | 1200 RPM |
| The Truck Master 3400 has its best performance in 6” suction hoses and secondary in 4” and 5” with reduced RPMs. For suction hoses above 6” (8”) we recommend this pump for vacuum lifts of fluids only. |
Vacuum
performance
| Metric | m3/h | kW | Nm |
| 1400 RPM | 3415 | 108 | 737 |
| 1300 RPM | 3347 | 92 | 676 |
| 1200 RPM | 3078 | 77 | 613 |
| 1100 RPM | 2839 | 64 | 556 |
| US | CFM | HP | Ibs *ft |
| 1400 RPM | 2010 | 147 | 543 |
| 1300 RPM | 1970 | 125 | 499 |
| 1200 RPM | 1812 | 105 | 452 |
| 1100 RPM | 1671 | 87 | 410 |
Pressure
performance
| Metric | m3/h | kW | Nm |
| 1400 RPM | 2502 | 133 | 907 |
| 1300 RPM | 2281 | 117 | 860 |
| 1200 RPM | 2068 | 98 | 780 |
| 1100 RPM | 1787 | 82 | 712 |
0,75 bar(g)
| US | CFM | HP | Ibs *ft |
| 1400 RPM | 1473 | 181 | 669 |
| 1300 RPM | 1343 | 159 | 634 |
| 1200 RPM | 1217 | 133 | 575 |
| 1100 RPM | 1052 | 112 | 525 |
10,9 psi
Water
consumtion
| Metric | 50% vacuum | 70% vacuum | 80% vacuum |
| 20℃ | 32 | 17 | 12 |
| 30℃ | 50 | 22 | 20 |
| 40℃ | 86 | 43 | 34 |
| 50℃ | 140 | 75 | 56 |
| 55℃ | 220 | 124 | 88 |
l/h
| US | 50% vacuum | 70% vacuum | 80% vacuum |
| 68℉ | 9 | 4 | 3 |
| 86℉ | 13 | 6 | 5 |
| 104℉ | 23 | 11 | 9 |
| 122℉ | 37 | 20 | 15 |
| 131℉ | 58 | 33 | 23 |
GAL/h
Bearing cover
Drive end
Item no.: 1620182
Bearing cover
Non-drive end
Item no.: 1620181
Bearing house
Drive end
Item no.: 1620179
Bearing house
Non-drive end
Item no.: 1620179
Bearing
Drive end
Item no.: 930000297
Bearing
Non-drive end
Item no.: 930000296
Mechanical shaft seal
Drive end
Item no.: 1634851
Mechanical shaft seal
Non-drive end
Item no.: 1634851
Pump house
Drive end
Item no.: 1620274
Pump house
Non-drive end
Item no.: 1620274
Flow plate cast iron
Drive end
Item no.: 1620281
Flow plate bronze
Drive end
Item no.: 1620283
Flow plate cast iron
Non-drive end
Item no.: 1620280
Flow plate bronze
Non-drive end
Item no.: 1620282
Shell
Cast iron
Item no.: 1620276
Assembly tools
Pump service
Item no.: 1629177
Automatic lubricator
Automatic lubricator
Item no.: 1639003
Set of gaskets
Set of gasket
Item no.: 1620208
System components for
Truck Master 3400
Water Separator 6
The SAMSON PUMPS Water Separator 6 is designed for Truck Master 3400 and conventional vacuum trucks with 6″ suction hoses.
| Suction hose | 6″ |
| ATEX | Zone 1 |
| Generation | 1 |
| Main material | PP |
4-way valve DN125
High performance and maintenance free 4-way valve DN125, controlled by a pneumatic actuator. Has 2 flow positions and a central position.
| Pipe system | DN125 |
| Operates by | Air |
| Generation | 2 |
| Main material | Cast iron |
Hydraulic motor set 160
Hydraulic motor set for Truck Master 3400 including adaptor, coupling & mounted on the pump. Ready to perform full vacuum and pressure.
| Suction hose | 6″ |
| Motor | 160 ISO |
| P.Max | 400 bar |
Non-return valve DN125
To secure water/air flow, install the non-return valve in the vacuum system avoiding water loss and pump drainage.
| Suction hose | 6″ |
| Pipe system | DN125 |
| P. Max | |
| Main material | Cast iron |
Vacuum control valve
Install the Vacuum control valve in the suction line and protect your vacuum pump from cavitation damage.
| Connection | 1″ BSPP |
| Area | 0 – 1013 mbar |
| Activates by | Auto |
| Required power | None |
The power
of liquid ring
technology
Build low noise, zero emissions and minimal maintenace vacuum trucks with liquid ring techonology. At Samson Pumps we believe liquid ring technology is the future for vacuum trucks and we are dedicated to create the vacuum pumps of the future.
Life-time
lubricated
bearings
lubricated
bearings
Bronze /
Cast iron
flow plates
Cast iron
flow plates
Integrated water system
 | High-performance rotor |
Mechanical shaft seals
Truck Master 3400
Specifications
| Part | Material | Specification EU | Specification US |
| Bearing cover | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Radial shaft seal | Rubber | DIN 3760A | DIN 3760A |
| Paper gasket | Paper | Oil resistant gasket | Oil resistant gasket |
| Bearing housing | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Mechanical shaft seal | Rubber / Stainless Steel / Silicium / Carbon | NBR / 1.4401 / SiC / C | NBR / 1.4401 / SiC / C |
| Pump housing | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Flow plate | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Flow plate (EX model) | Bronze | CuSn10-C EN 1982 (CC480K) | C92700 B505 B505M |
| Rubber gasket | Rubber | NBR | NBR |
| Shell | Cast iron | EN-GJL-250; EN 1561 | 250/275-35-35B 40-40B |
| Rotor | Stainless steel | HPR | HPR |
Other vacuum
truck pumps
They stand out on durability, robustness as well as being service friendly, easy to install and operate. They are designed and optimized for vacuum truck operations.
Get started with Truck Master pumps
Whether you are interested in prizing, calculations or simply more information about our Truck Master series.
We are here to assist you!
Direct: +45 87 50 95 96
E-mail: htm@samson-pumps.com